BSS 506

Strong and Powerful Vacuuming

• Constantly high suction power through fully automatic TACT filter cleaning system

• High extraction capacity thanks to innovative Eco-filter concept

• High suction power thanks to strong low-pressure and high air flow

• Automatic ON-/OFF switch for electric power tools

• Wet suction inlay for water-bound dust

• Variable adjustment for individual suction power

• Large integrated surface for tools and accessories

• Easy storage of suction pipe and power cord

• Adapter for electric power tool, ø 38 mm, hose ø 40 mm

• Continuous vibration for equal suction capacity

Disposable vacuum paper bag Part No. 20047047	Reusable vacuum filter Part No. 20047046

  

MODEL BSS 506 Specifications Summary
Part No.	20047045
Power Input	1.3 kw
Suction	Max. 230 mbar
Suction power	6 L/sec
Capacity	35 L
Pipe length	5 m
Cable length	7.5 m
Weight	12.5 kg

BAIER BLADES

These blades have been developed for perfect interaction with Baier Wall Chasers, guaranteeing the best 
results while providing an outstanding and successful cut.

Specifically designed for:
• Hard Concrete• General purpose use

185 mm Blades	150 mm Blades

Baier Wall Chasers BDN 464/4

BDN 464/4

Hard material, large channel cutter

• Time and cost saving: Three working steps in one

• Powerful - strong motor output and high rpm makes channel cutting possible - even in the hardest material

• Easy handling thanks to an ergonomic handle and tool-free depth adjustment (45 mm - 60 mm)

• Safe & strong - No overheating.

• Easy restart

• Electronic control which allows for a soft start

• LED-monitor for Identifying cutting capacity

• Blade thread ø 22.2 mm with four diamond cutting blades

MODEL BDN464/4 Specifications Summary
Part No.	2004744
Power Input	2.4 kW
Speed	7.800 rpm
Blades Ø	4x185 mm
Cut Width	9-43 mm
Cut Depth	15-60 mm
Weight	6.5 kg

Baier Wall Chasers BDN 466/6

BDN 466/6

Hard material, large channel cutter

• Time and cost saving: Three working steps in one

• Powerful - strong motor output and high rpm makes channel cutting possible - even in the hardest material

• Easy handling thanks to an ergonomic handle and tool-free depth adjustment (45 mm - 60 mm)

• Safe & strong - No overheating.

• Easy restart• Electronic control which allows for a soft start

• LED-monitor for Identifying cutting capacity

• Blade thread ø 22.2 mm with four diamond cutting blades

  

MODEL BDN466/6 Specifications Summary
Part No.	20047041
Power Input	2.4 kW
Speed	8.200 rpm
Blades Ø	6x150 mm
Cut Width	7-35 mm
Cut Depth	7-45 mm
Weight	5.8 kg

Baier Wall Chasers BDN 455

BDN 455

Cutting under toughest conditions

• Perfect synchronisation of motor, gear, and rotation speed 

• Gear parts made of treated steel designed for long time load

• Gear box made out of aluminum pressure cast, powder coated

• Protection housing made of aluminum, pressure cast and powder coated with integrated dust suction connection

• Compact design, low weight, perfect for reaching corners

• Electronic control for soft start

• Electronic indicator designed to show cutting performance• Electronic switch-off if overloaded

• Easy to restart

  

MODEL BDN455 Specifications Summary
Part No.	20047043
Power Input	1.8 kW
Speed	4.100 rpm
Blades Ø	2x185 mm
Cut Width	9-43 mm
Cut Depth	15-60 mm
Weight	6.6 kg

Baier Wall Chasers BDN 453 

Cutting under toughest conditions

• Perfect synchronisation of motor, gear, and rotation speed 

• Gear parts made of treated steel designed for long time load

• Gear box made out of aluminum pressure cast, powder coated

• Protection housing made of aluminum, pressure cast and powder coated with integrated dust suction connection

• Compact design, low weight, perfect for reaching corners

• Electronic control for soft start

• Electronic indicator designed to show cutting performance

• Electronic switch-off if overloaded

• Easy to restart

MODEL BDN453 Specifications Summary
Part No.	20047042
Power Input	1.8 kW
Speed	7.800 rpm
Blades Ø	2x150 mm
Cut Width	7-35 mm
Cut Depth	7-45 mm
Weight	5.6 kg

TBG-130 C Bridge Deck Groover

Features/Benefits:

• Vacuum - positive displacement with larger vacuum chamber, replaceable filters and easily accessible cleanouts
• Rapid blade carriage retracts
• Automatic blade coolant.
• Side mounted removable operator platform
• Front and rear pointers
• Night operation light package
• Automatic kick outs for starting and stopping cut in the same place
• Adjustable bogey for independent depth control
• Hydraulically driven positive displacement blower with inlet filter and discharge silencer
• Slurry pump
• Heavy duty pad-eyes on all four corners for crane loading onto bridges with no access.
• On board 50 gallon fuel tank provides up to 10 hours of operating time.

Specifications:

Engine: Cummins model 6.7 Cummins turbo-charged diesel with full electronic control and on board diagnostics.195 HP @2000 rpm.

Dimensions: Length: 2.3 m Cutting Head Width: 1 m max. Height: 3 m, Bladeshaft: 12 cm; Blade Diameter: 30 cm.

Drive Control: Provided by two hydraulic wheel motor assemblies, each with integral brake and two speed function.

Brakes: 2 wheel heavy duty disk brakes

Bladeshaft: Closed loop variable displacement pump and bent

Drive: axis fixed displacement axial piston motor. Both 90 cc.

Blade Coolant: Magnetic strainer and water pressure gauge with audible alarm for low pressure and automatic coolant shaft. Pump flow range is infinitely variable up to 181L, with max 5000 PSI.

Function Power: Axial piston pump for 90 L to control valves

Instrumentation: Blade drive pressure gauge, Blade coolant pressure gauge & low pressure alarm, Engine oil pressure gauge (with low pressure shutdown) Engine coolant temperature gauge (with high temperature shutdown), Engine tachometer (max. engine speed = 2100 rpm), Engine voltage meter, Electronic data screen that the operator can preset to read J1939 fault codes and monitor engine parameters (i.e. RPM, water temp, oil pressure, boost pressure, load, engine hours, date/time, etc)

PC150 Bump Grinder and Groover

Features/Benefits:

• Capable of grinding to within 25 cm of a vertical wall.
• Fast, nimble and easy to use.
• 5" diameter spindle for use with 30 cm diameter blades and can accept up to 91cm  width grinding head.
• Front bogey assembly is adjustable for an effective wheelbase of 2m to 3 m (centre of cutting head to centre of front bogey).
• On-board vacuum system with diaphragm slurry pump and silencer.

Specifications:

Engine: Cummins QSB 6.7 liquid cooled, turbocharged after cooled, electronic, controlled diesel engine producing 260 HP @ 2000 RPM. Drive to the blades is through a power take-off clutch and mechanical gear box and belt drive. Fuel capacity is 380 litres (10 hours of operating time).

Head Drive: Power from the engine is transmitted through a manually operated/over centre PTO clutch into a right angle drive
gearbox through a special shock absorbing coupler. The vacuum blower is mounted directly above the right angle drive and driven by one of the output shafts.

Blades: A 12 cm diameter spindle for use with 30 cm diameter blades is standard.

Propulsion: Drive is provided by two hydraulic wheel motor assemblies, each with integral brake and two speed function. Speed is 0-100 meters per minute forward/reverse.

Controls: Ground drive controlled with an electronic joystick which drives a Danfoss proportional drive. Speed is 0-100 MPM forward or reverse.

Instrumentation: (lighted for night time operations): Blade Drive Pressure Gauge; Blade Coolant Pressure Gauge and Alarm; Engine Oil Pressure Gauge (with low pressure shutdown); Engine Coolant Temperature Gauge (with high temperature shutdown); Engine Tachometer (max. engine speed is 2100 RPM); Engine Voltage Meter, Gear box lube pressure gauge, Hydraulic system pressure gauge, Blade coolant pressure gauge and low pressure alarm, Electronic data screen that the operator can preset to read J1939 fault codes and monitor engine parameters (i.e. RPM, water temp, oil pressure, boost pressure, %load, engine hours, date/time, etc)

Grinding: Length = 5 m. Front Bogey assembly is hydraulically adjustable for an effective wheelbase of 2 m to 3 m

Dimensions: (centre of cutting head to centre of front bogey). Width = 2.5 m. Weight is approximately 8 Tons with grinding head.
Height: 2.5 m  with machine unpinned and lowered

Curb Cutter 2000

Cuts driveway and ramp openings in all type of existing curbs Precise diamond cutting means there is no damage to adjacent curb structure or roadway.

Features and Benefits:

• Precision rind-on single operator machine that can cut a 5 m driveway opening in one hour
• 100 HP John Deere diesel engine
• Cuts driveway and ramp openings in all type of existing curbs
• Precise diamond cutting means there is no damage to adjacent curb structure or roadway

 

 

 

 

CURB CUTTER 2000 Specifications:

ENGINE:

• 100 HP John Deere water cooled diesel engine with electronic
• Safety shut down system
• Fuel Tank Capacity: 28 gallons
• Drive Speed: 0-60 meters/min

HYDRAULICS:

• 75 gallon hydraulic oil tank capacity
• Blade pump – 190 L of pressure flow compensation
• Closed loop ground drive pump with piggy back gear pump for cylinder functions
• 5 bank control valve
• 10 micron hydraulic filters
• High efficiency hydraulic heat exchanger
• Hydraulic flow meter and pressure gauge

BLADE:

• Maximum Blade Diameter: 91 cm  flush cut
• Maximum Plunge: 38 cm
• Maximum Vertical: 25 cm
• Maximum Right to Left Angle 15 degrees
• Maximum Reverse Angle w/50 cm blade: 5 degrees
• Arbor Diameter: 2.5 cm
• Blade Tilt: 15-17 degrees

CG-1 & CG-2 Walk Behind Mini Groovers Grinders

CG-1 Compact Groover	CG-2 Compact Groover
Details: - Affordable alternative to large grinding machines. - Self propelled hydrostatic transmission. - Heavy duty construction to handle big jobs. - Compact & manoeuvrable in hard to rach areas. - Power raise and lower system. - Up cut grinding head rotation. - Suits 250mm wide grinding heads
MINI GROOVER CG-1 Model# CG-1 Motor 20HP Motor Type Honda GX760 Petrol Hight 987mm Width 685mm Length 1067mm Weight 362kg Blade Ø 300mm Head Capacity (Wide) 250mm	MINI GROOVER CG-2 Model# CG-2 Motor 49HP Motor Type Deutz Diesel Hight 1803mm Width 851mm Length 1670mm Weight 1043kg Blade Ø 300mm Head Capacity (Wide) 406mm

CC150 Early Entry Saw

Features/Benefits:

• Uses standard 6" diamond blades with 1" arbor
• Mechanical blade depth control
• Centre lift mechanism
• Integrated lifting handle
• Special arbors not needed
• Reliable Honda or Briggs engines
• Two front wheels for greater stability
• Non-marking polyurethane wheels
• Long lasting skid-plate

The CC150-EE utilizes a one-inch arbor, allowing you to use standard diamond blades without worrying about special arbors.

CC1700 Crack Chasing Saw

Features/Benefits:

• Extremely operator friendly
• Centre mounted blade makes following random cracks easy and accurate
• Safer to operate than carbide cutter units
• Eliminates percussive fractures often caused by carbide cutters
• Depth of cut indicator directly in the operator’s line of sight minimizes cutting depth and saves on sealant costs
• Produces a perfect sealant reservoir for maximum pavement life
• Push button electric depth control on the handle for extra smooth routing of even the most erratic random cracks
• 
  

CC213H Floor Grinder

Accommodates Both Diamond Grinding Heads and Grinding Blocks

 Details:

- Remote throttle
- Multiple grease point.
- Water connection.
- Adjustable handles.
- Multiple lifing handles and single lifting point.
- Height of the grinding head can be changed to allow for a different weight distribution
- can use diamond grinding head, carbide blocks or grinding stones.

DUAL HEAD FLOOR GRINDER
Model#	CC213H
Motor	10.2 HP
Motor Type	Honda
Hight	1066 mm
Width	711 mm
Length	1498 mm
Weight with 10" head	226kg

CC113H Floor Grinder

Grinds, Cleans, Levels and Smooths Bumps and Uneven Areas Quickly

Details:

- Single head for fast aggressive grinding.
- 13HP Honda gas engine.
- Wet or dry attchments.
- Remote throttle.
- Adjustable wheel location for added grinding strength.
- 8 Litre petrol tank.
- Single greasing point.

SINGLE HEAD FLOOR GRINDER
Model#	CC113H
Motor	10.2 HP
Motor Type	Honda
Hight	1010 mm
Width	502 mm
Length	1320 mm
Weight with 10" head	145kg

HYCON Power Pack HPP13D

Output 11 HP

 

HYCON HPP13D is a medium sized hydraulic diesel powerpack made for demanding users. This powerpack gives you absolute maximum power to operate tools like breakers, submersible pumps, cut-off saws, drilling tools, core drills, impact wrenches and many other tools.

Advantages:

- Easily transported inside a van
- ON-OFF valve for easy change of tool
- EXTREMELY easy to service - direct access to ALL parts
- Oil level eye
- Few wearing parts/all run in oil/low cost
- Very strong and sturdy steel frame
- High quality diesel engine
- Both recoil and electric start

Technical Details

Name

HYCON Powerpack HPP13D

Oil Flow, I.p.m

1x30

Max. pressure nominal, bar

120

Pressure relief valve, bar

140

Pump

Gear pump

Oil temperature

Max, 70C

Hydraulic oil tank capacity liters

Min.6/Max.8

Diesel tank capacity, liters

6.5

Hydraulic system compl., liters

9

Filter system (filter element)

25 Mcron with by-pass

Engine

Lombardini LD15-440 11.0HP

Dimensions (LxWxH)

710x595x645 mm

Weight, without hydraulic oil, kg

96

HYCON Power Pack HPP18E

Output 11kW

 

HYCON HPP18E is equipped with a powerful 11 kW motor. We offer two versions: 30 l.p.m. or 40 l.p.m. It is mostly used indoor. Typically the customers are professional companies specialized in drilling/cutting concrete, who use ø400/ø450 mm cut-off saws, diamond chain saws and ring saws. Also widely used for ground water lowering.

In spite of the strong motor, the HPP18E is a compact powerpack easy to transport in any van. It is very strongly built, and can work even under the toughest conditions, because the motor and the electric box are approved for IP55 and IP54, respectively.

HPP18E has a slow start function reducing the load during starting. It needs no water cooling as it has integrated oil cooler, which is a great advantage

Technical Details

Name

HYCON Powerpack HPP18E

Oil Flow, I.p.m

1x30 or 1x40

Max. pressure, bar

160

Motor

11kW 25A (30Ipm), 35A (40Ipm) / 3x400V 50 Hz

Flow

Fixed

Weight, kg

128

Noise level 1 m Lpa dB

86

Noise level Lwa dB

98

HYCON Power Pack HPP18V Flex

Output 18 HP

 

HYCON HPP18V FLEX features infinitely variable flow adjustment from 0 to 40 l.p.m. It is extremely popular among users of high performance diamond tools for drilling and cutting concrete. They are users who often need the high power and who want a robust, high quality 40 l.p.m. powerpack.

With its great flow range, the HPP18V FLEX can operate all tools - it is typically used for cut-off saws, diamond chain saws, ringsaws and other 40 l.p.m. tools.

HPP18V FLEX has both electric and recoil start, so you can start it even with a dead battery.

Technical Details

Name

HYCON Powerpack HPP18V FLEX

Oil Flow, I.p.m

1x20-30-40

Max. pressure, bar

160

Engine

Vanguard 18 petrol

POR/adjustable

Adjustable

Starter

Recoil and Electric

Weight, kg

105

Noise level 1m Lpa db

89

Noise level Lwa db

101

Drive Unit BE-S2 Output 14 kW

Drive Unit BE-S2

Output 14 kW

- The lightest 14 kW drive for professional concrete processing
- Powerful, simple and handy
- Optimum for hydraulic drilling and hand saws

Easy to use, since motor can be detached	Can also be used with 16A mains

Drive unit AU Working pressure up to 2000 bar

Drive unit AU

Working pressure up to 2000 bar

- Suitable for press tools CP110 and BTH350***
- Pressing force of up to 2100 tons
- Robust due to compact design

User friendly thanks to clear control and operating elements	Accessories: Distribution head for 8 press tools	Two separately controllable outputs for controlled pressing work

Drive unit DK-S Output 48 HP

Drive unit DK-S

Output 48 HP

- Suitable for wall saws, wire saws and drilling
- Ideal cutting speed due to having 4 settings
- Extremely suitable for construction sites without a power connection thanks to the turbo diesel motor

Detachable hydraulic control unit	4 settings for ideal cutting speed	Robust control and operating elements

Drive unit PPH40RR Output 40 kW

Drive unit PPH40RR

Output 40 kW

- Suitable for wall saws, wire saws and drilling
- Ideal cutting speed due to having 4 settings
- Soft start of wire using potentiometer
- Service-friendly thanks to quick-release plastic cover

Freedom of movement thanks to radio remote control. All functions selectable via radio remote control	Direction of rotation switch, secondary connections, hour counter	The plastic cover can be removed without tools

Drive unit PPH20*** Output 20 kW

Drive unit PPH20***

Output 20 kW

- Suitable for wall saws, wire saws and drilling
- Ideal cutting speed due to having 4 settings
- Robust, reliable structure
- Current rotating direction easy to reverse using rotating direction switch
- Service-friendly thanks to quick-release plastic cover

Ergonomically arranged control elements	Safe because of top quality electrical components	The plastic cover can beremoved without tools